Setting Port Trunking - Enterasys Matrix E1 1G694-13 Configuration Manual

Port Configuration

Setting Port Trunking

4.2.10 Setting Port Trunking
Purpose
To display trunking information, to create and delete trunks on the device, and to display and
configure port settings for a particular trunk.
Commands
The commands needed to configure port trunking are listed below and described in the associated
section as shown.
•
show trunk (Section
•
set trunk (Section
•
clear trunk (Section
•
set trunk port (Section
•
clear trunk port
4-30 Matrix E1 Series (1G694-13) Configuration Guide
4.2.10.1)
4.2.10.2)
4.2.10.3)
4.2.10.4)
(Section 4.2.10.5)