Enterasys Matrix E1 1G694-13 Configuration Manual page 236

Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
CLI Task
Spanning Tree port
priority (set)
Spanning Tree port
priority (show)
Spanning Tree port
status (set)
Spanning Tree priority
(set)
Spanning Tree real time
message age (set)
Spanning Tree real time
message age (show)
Spanning Tree transmit
hold count (set)
Spanning Tree transmit
hold count (show)
Spanning Tree topology
change trap suppress
(set)
A-10 Matrix E1 Series (1G694-13) Configuration Guide
Command Function and Syntax
Sets a port's priority for use in the Spanning Tree algorithm (STA). For
details, refer to Section
set spantree portpri port_string priority
Displays the Spanning Tree priority for one or more ports. For details,
refer to Section 5.2.2.3.
show spantree portpri port_string
Enables or disables the Spanning Tree algorithm (STA) on one or more
ports. For details, refer to
set spantree portadmin port_string {enable | disable}
Sets the device's Spanning Tree priority. The lower the numeric value,
the higher the device priority. For details, refer to
set spantree priority bridge_priority
Enables or disables real time BPDU message age mode. For details,
refer to Section 5.2.1.16.
set spantree rtmsgage {enable | disable}
Displays the status of real time BPDU message age mode. For details,
refer to Section 5.2.1.15.
show spantree rtmsgage
Sets the maximum transmit hold count on a Spanning Tree. This is the
number of BPDUs which will be transmitted before transmissions are
subject to a one-second timer. For details, refer to
set spantree txholdcount txholdcount
Displays the maximum BPDU transmission rate. For details, refer to
Section 5.2.1.17.
show spantree txholdcount
Disables or enables topology change trap suppression on Rapid
Spanning Tree edge ports. When enabled, this prevents edge ports
from sending topology change traps. For details, refer to
Section 5.2.1.14.
set spantree tctrapsuppress {disable | enable}
5.2.2.4.
Section 5.2.2.1.
Section 5.2.1.5.
Section 5.2.1.18.