Show Trap - Enterasys Matrix E1 1G694-13 Configuration Manual

3.2.5.1

show trap

Use this command to display SNMP trap configuration information.
show trap
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only
Example
This example shows how to use the show trap command. It shows that there are two SNMP traps
enabled. One is assigned to the "orange" community at IP address 1.2.3.4. Another is assigned to
the "blue" community at IP address 100.54.5.112.
Matrix>show trap
--------------------
orange
blue
public
public
public
Community Name IP Address
---------------
1.2.3.4
100.54.5.112
0.0.0.0
0.0.0.0
0.0.0.0
Matrix E1 Series (1G694-13) Configuration Guide
Startup and General Configuration
Setting SNMP Traps
Status
--------
enabled
enabled
disabled
disabled
disabled
3-31