Setting The Host Vlan - Enterasys Matrix E1 1G694-13 Configuration Manual

6.2.5

Setting the Host VLAN

Purpose
To assign the host port on the switch to a VLAN that only select devices are allowed to access. This
secures the host port. This is useful, for example, in restricting the configuration of the devices in
the system to a limited number of users.
NOTE: The host
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
•
show host vlan (Section
•
set host vlan (Section
•
clear host vlan (Section
port
is the management entity of the switch.
6.2.5.1)
6.2.5.2)
6.2.5.3)
Matrix E1 Series (1G694-13) Configuration Guide
802.1Q VLAN Configuration
Setting the Host VLAN
6-21