9.2.2.3
history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the commands entered up to a maximum of 50, as specified in the set history
command
(Section
9.2.2.6).
history
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
Matrix>history
1 show arp
2 history
3 show ip
4 show cdp ge.0.1
5 history
Monitoring Network Events and Status
Matrix E1 Series (1G694-13) Configuration Guide
Network Management
9-11