Enterasys Matrix E1 1G694-13 Configuration Manual page 213

Table 9-3 show rmon stats Output Details (Continued)
Output
Fragments
Jabbers
Octets
0 – 64 Octets
65 – 127 Octets
128 – 255 Octets
256 – 511 Octets
512 – 1023 Octets Total number of frames, including bad frames, received that
1024 – 1518
Octets
What It Displays...
Number of received frames that are not the minimum
number of bytes in length, or received frames that had a bad
or missing Frame Check Sequence (FCS), were less than 64
bytes in length (excluding framing bits, but including FCS
bytes) and had an invalid CRC. It is normal for this value to
increment since fragments are a normal result of collisions
in a half-duplex network.
Total number of frames that were greater than 1518 bytes
and had either a bad FCS or a bad CRC.
Total number of octets (bytes) of data, including those in
bad frames, received on this interface.
Total number of frames, including bad frames, received that
were 64 bytes in length (excluding framing bits, but
including FCS bytes).
Total number of frames, including bad frames, received that
were between 65 and 127 bytes in length (excluding
framing bits, but including FCS bytes).
Total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding
framing bits, but including FCS bytes).
Total number of frames, including bad frames, received that
were between 256 and 511 bytes in length (excluding
framing bits, but including FCS bytes).
were between 512 and 1023 bytes in length (excluding
framing bits, but including FCS bytes).
Total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding
framing bits, but including FCS bytes).
Matrix E1 Series (1G694-13) Configuration Guide
Network Management
Monitoring Network Events and Status
9-21