Table of Contents
Advertisement
CLI Task
IP address (show)
IP route (clear)
IP route (set)
IP route (show)
jumbo frame support
(set)
jumbo frame support
(show)
MAC (clear)
MAC (show)
mirroring (set port)
Command Function and Syntax
Displays the local host port IP address and the system mask. For
details, refer to
Section
show ip address
Deletes IP routing table entries. For details, refer to
clear ip route gateway
Adds IP addresses to the device's IP routing table. For details, refer to
Section
9.2.3.5.
set ip route gateway
Displays the device's IP routing table entries. For details, refer to
Section
9.2.3.4.
show ip route
Displays the status of jumbo frame support on the device. For details,
refer to
Section
4.2.5.1.
show jumbo
Enables or disables jumbo frame support on the device. For details,
refer to
Section
4.2.5.2.
set jumbo {enable | disable}
Deletes dynamic MAC address information for the device. For
details, refer to
Section
clear mac
Displays MAC addresses contained in the device's source address
table. For details, refer to
show mac [address mac address] [fid vlan_id ] [port port_string]
[type {learned | self | mgmt}]
Enables or disables mirroring between two ports. For details, refer to
Section
4.2.8.2.
set port mirroring [port_string port_string] {disable | enable}
Matrix E1 Series (1G694-13) Configuration Guide
Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
3.2.2.10.
9.2.3.8.
Section
9.2.3.7.
Section
9.2.3.6.
A-5
Advertisement
Table of Contents
