Set Spantree Edgeportdelay - Enterasys Matrix E1 1G694-13 Configuration Manual

5.2.1.10 set spantree edgeportdelay

Use this command to enable or disable the edge port delay function, which causes an edge port to
delay (by 2 "hello" periods) moving to a forwarding state.
set spantree edgeportdelay {disable | enable}
Syntax Description
disable | enable
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable Spanning Tree edge port delay:
Matrix>set spantree edgeportdelay disable
Success setting edge port delay to DISABLE.
Reviewing and Setting Spanning Tree Bridge Parameters
Disables or enables edge port delay.
Matrix E1 Series (1G694-13) Configuration Guide
Spanning Tree Configuration
5-15