Set System Location - Enterasys Matrix E1 1G694-13 Configuration Manual

3.2.2.6

set system location

Use this command to identify the location of the system.
set system location "location_string"
Syntax Description
location_string
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the system location string:
Matrix>set system location "Bldg N32-04 Closet 9 Alpha Sierra"
System location set.
Specifies a text string that indicates where the system is
located. A location string containing a space in the text
must be enclosed in quotes as shown in the example
below.
Matrix E1 Series (1G694-13) Configuration Guide
Startup and General Configuration
Setting Basic System Information
3-17