Enterasys Matrix E1 1G694-13 Configuration Manual page 107

This example shows how to display Spanning Tree information for front panel port 3:
Matrix>show spantree stats port ge.0.3
Spanning tree
Designated Root MacAddr
Designated Root Priority
Designated Root Cost
Designated Root Port
Root Max Age
Root Hello Time
Root Hold Time
Root Forward Delay
Bridge ID Mac Address
Bridge ID Priority
Bridge Max Age
Bridge Hello Time
Bridge Forward Delay
Topology Change Count
Port
-------------------------------------------------------------
ge.0.3
Table 5-1
Table 5-1 show spantree stats Output Details
Output
Spanning tree
Designated Root MacAddr
Designated Root Priority
Designated Root Cost
Designated Root Port
Root Max Age
State
blocking
provides an explanation of command output.
Reviewing and Setting Spanning Tree Bridge Parameters
- enabled
- 00:00:1d:11:71:00
- 32768
- 0
- 0
- 20 sec
- 2 sec
- 1 sec
- 15 sec
- 00:00:1d:11:71:00
- 32768
- 20 sec
- 2 sec
- 15 sec
- 6
Cost Priority
100 128
What It Displays...
Whether the Spanning Tree Protocol is enabled or
disabled.
MAC address of the designated Spanning Tree
root bridge.
Priority of the designated root bridge.
Total path cost to reach the root.
Port through which the root bridge can be reached.
Amount of time (in seconds) a BPDU packet
should be considered valid.
Matrix E1 Series (1G694-13) Configuration Guide
Spanning Tree Configuration
5-5