Enterasys Matrix E1 1G694-13 Configuration Manual page 237

CLI Task
Spanning Tree topology
change trap suppress
(show)
Spanning Tree version
(set)
Spanning Tree version
(show)
status (show port)
system (show)
system baud (set)
system contact (set)
system location (set)
system name (set)
Command Function and Syntax
Displays the status of topology change trap suppression on Rapid
Spanning Tree edge ports. For details, refer to
show spantree tctrapsuppress
Sets the version of the Spanning Tree protocol to RSTP (Rapid
Spanning Tree Protocol) or to STP 802.1D-compatible. For details,
refer to Section 5.2.1.4.
set spantree version {rstp | stpcompatible}
Displays the current version of the Spanning Tree protocol running on
the device. For details, refer to
show spantree version
Displays port operating status, duplex mode, speed and port type, and
statistical information about traffic received and transmitted through
one or all ports on the device. For details, refer to
show port status [port_string]
Displays system information, including operating status, baud rate,
uptime, system name, location and contact name. For details, refer to
Section 3.2.2.1.
show system
Sets the console port baud rate. For details, refer to
set system baud rate
Sets a contact person for the system. For details, refer to
Section 3.2.2.7.
set system contact "contact_string"
Sets a location for the system. For details, refer to
set system location "location_string"
Sets a name for the system. For details, refer to
set system name "name_string"
Matrix E1 Series (1G694-13) Configuration Guide
Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
Section
Section 5.2.1.3.
Section
Section
Section
5.2.1.13.
4.2.1.1.
Section 3.2.2.9.
3.2.2.6.
3.2.2.5.
A-11