Table of Contents
Advertisement
Matrix E1 CLI Quick Reference Guide
CLI Tasks, Commands and Syntax
CLI Task
terminal (set)
time (set)
time (show)
trap (clear)
trap (set)
trap (show)
trap (set port)
trap (show port)
trunk (clear)
A-12
Matrix E1 Series (1G694-13) Configuration Guide
Command Function and Syntax
Sets the number of columns and rows of the display terminal
connected to the console port of the device. This information is used
to control the output of the CLI itself. For details, refer to
Section
3.2.2.8.
set terminal {rows num_rows | cols num_cols}
Changes the time of day on the system clock. For details, refer to
Section
3.2.2.3.
set time [day_of_week][mm/dd/yyyy][hh:mm:ss]
Displays the current time of day in the system clock. For details, refer
to
Section
3.2.2.2.
show time
Deletes an SNMP trap assigned to an IP address. For details, refer to
Section
3.2.5.3.
clear trap ip_address
Sets an SNMP trap assigned to an IP address. For details, refer to
Section
3.2.5.2.
set trap ip_ address community_name {enable | disable}
Displays SNMP trap configuration information. For details, refer to
Section
3.2.5.1.
show trap
Enables or disables an SNMP link trap for one or more ports. For
details, refer to
Section
set port trap port_string {enable | disable}
Displays the status of an SNMP link trap for one or more ports. For
details, refer to
Section
show port trap [port_string]
Deletes a trunk from the device. For details, refer to
clear trunk [trunk_name]
4.2.6.2.
4.2.6.1.
Section
4.2.10.3.
Advertisement
Table of Contents
