Enterasys Matrix E1 1G694-13 Configuration Manual page 34

Startup and General Configuration
Factory Default Settings
Table 3-1 Factory Default Device Settings (Continued)
Device Feature
Password
Port auto-negotiation
Port enable/disable
Port trap
QoS weighted
round-robin (WRR)
Spanning Tree
Spanning Tree edge
port administrative
status
Spanning Tree edge
port delay
Spanning Tree forward
delay
Spanning Tree hello
interval
Spanning Tree ID
(SID)
Spanning Tree legacy
path cost
Spanning Tree
maximum aging time
Spanning Tree port cost
Spanning Tree port
priority
Spanning Tree priority
3-2 Matrix E1 Series (1G694-13) Configuration Guide
Default Setting
None configured. User must press ENTER at password prompt to
access CLI.
Disabled.
Enabled.
Link traps for all ports are enabled.
Set to 25% for weighted queues (0 through 3).
Enabled (globally and on all ports).
Enabled.
Enabled.
Set to 15 seconds.
Set to 2 seconds.
Does not apply to MATRIX
Set to 1.
Enabled.
Set to 20 seconds.
Set to 1 for both 1-Gigabit and 10-Gigabit Ethernet ports.
All 1-Gigabit ports are set to 128 (medium priority). The 10-Gigabit
uplink port is set to 112.
Bridge priority is set to 32768.