Set Port Trap - Enterasys Matrix E1 1G694-13 Configuration Manual

4.2.6.2

set port trap

Use this command to enable or disable an SNMP link trap on one or more ports.
set port trap port_string {enable | disable}
Syntax Description
port_string
enable | disable
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable the SNMP link trap for Gigabit Ethernet front panel port 3:
Matrix>set port trap ge.0.3 disable
SNMP link traps disabled for port ge.0.3
Specifies the port(s) for which a trap will be enabled on
disabled. For a detailed description of possible port_string
values, refer to Section
Enables or disables a trap on the specified port.
Matrix E1 Series (1G694-13) Configuration Guide
4.1.2.
Port Configuration
Setting Port Traps
4-25