Show Ip Pimsm Interface; Show Ip Pimsm Componenettable Output Detail - Enterasys G3G170-24 Cli Reference Manual

show ip pimsm interface

Example
This example shows how to display PIM router information:
G3(su)->router> show ip pimsm componenttable
Component
Index
----------
1
Table 16‐8 provides an explanation of the command output.
Table 16-8 show ip pimsm componenettable Output Details
Output Field
Component Index
Component BSR
Address
Component BSR
Expiry Time
Component CRP
Hold Time
show ip pimsm interface
This command displays PIM‐SM status of the router interfaces. With the stats parameter, this
command displays statistical information for PIM‐SM on the specified interface.
Syntax
show ip pimsm interface {vlan vlan-id | stats {vlan-id | all}}
Parameters
vlan vlan‐id
stats
vlan‐id | all
Defaults
None.
Mode
Any router mode.
16-50 IPv4 Routing Protocol Configuration
COMPONENT TABLE
Component Component
BSR Address BSR Expiry Time CRP Hold Time
(hh:mm:ss)
--------------- --------------- -------------
192.168.30.2 00:02:10
What it displays
This field displays a number which uniquely identifies the component.
This field displays the IP address of the bootstrap router (BSR) for the local PIM
region.
This field displays the minimum time remaining before the BSR in the local domain
will be declared down.
This field displays the hold time of the component when it is a candidate rendezvous
point.
Display PIM‐SM information for the specified IP interface enabled for
PIM.
Display PIM‐SM interface statistics.
Display statistics for a specific VLAN or all VLANs.
Component
(hh:mm:ss)
00:00:00