Show License; Clear License - Enterasys G3G170-24 Cli Reference Manual

character string manually, ensure that you exactly match the capitalization of the character string
sent to you.
Every license is associated with a specific hardware platform, based on the serial number of the
hardware platform. If you need to move a license from one hardware platform to another, you
must contact Enterasys Customer Support to arrange for re‐hosting of the license.
Example
This example shows how to activate a permanent license key on the switch with serial number
075103099041
G3(rw)->set license INCREMENT G3ipv6router 2008.0212 permanent DF6A8558E5AB
075103099041
Validating license
License successfully validated and set
G3(rw)->

show license

Use this command to display license key information for switches with activated licenses.
Syntax
show license
Parameters
Defaults
Mode
Switch command, read‐only.
Usage
Licenses can be displayed, applied, and cleared only with the license commands described in this
chapter. General configuration commands such as show config or clear config do not affect
licenses.
Example
This example shows how to display license key information .
G3(ro)->show license
key: INCREMENT
status: Active

clear license

Use this command to clear the license key settings.
Syntax
clear license featureId feature
.
2006.0728 permanent 31173CAC6495 045100039001
show license
Enterasys G-Series CLI Reference 2-29