maximum-paths
maximum-paths
This command sets the number of paths that OSPFv3 can report for a given destination.
Syntax
maximum-paths maxpaths
no maximum-paths
Parameters
maxpaths
Defaults
The default value is 4.
Mode
Router OSPFv3 configuration: G3(su)‐>router(Config‐router)#
Usage
Use the no form of this command to reset the maximum number of paths to the default value of 4.
Example
This example sets the maximum number of paths for a given destination to 3.
G3(su)->router(Config-router)# maximum-paths 3
redistribute
This command configures the OSPFv3 protocol to allow redistribution of routes from the specified
source protocol/routers.
Syntax
redistribute {connected | static} [metric value] [metric-type type] [tag tag]
no redistribute {connected | static} [metric] [metric-type] [tag]
Parameters
connected | static
metric value
metric‐type type
tag tag
19-8 OSPFv3 Configuration
Specifies the value for maxpaths, which can range from 1 to 4.
Specifies the source protocol to redistribute.
(Optional) Specifies the route redistribution metric. The metric value can
range from 0 to 16777214.
(Optional) Specifies the route redistribution metric type. The metric type
can be 1, which specifies type 1 external route, or 2, which specifies type
2 external route.
(Optional) Specifies a route redistribution tag. The value of tag can
range from 0 to4294967295.