Show Spantree Lpthreshold; Clear Spantree Lpthreshold - Enterasys G3G170-24 Cli Reference Manual

Example
This example shows how to set the Loop Protect threshold value to 4:
G3(rw)->set spantree lpthreshold 4

show spantree lpthreshold

Use this command to display the current value of the Loop Protect event threshold.
Syntax
show spantree lpthreshold
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the current Loop Protect threshold value:
G3(rw)->show spantree lpthreshold
The Loop Protect event threshold value is 4

clear spantree lpthreshold

Use this command to return the Loop Protect event threshold to its default value of 3.
Syntax
clear spantree lpthreshold
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the Loop Protect event threshold to the default of 3:
G3(rw)->clear spantree lpthreshold
show spantree lpthreshold
Enterasys G-Series CLI Reference 6-45