Set Macauthentication Macinitialize; Set Macauthentication Reauthentication - Enterasys G3G170-24 Cli Reference Manual

set macauthentication macinitialize

set macauthentication macinitialize
Use this command to force a current MAC authentication session to re‐initialize and remove the
session.
Syntax
set macauthentication macinitialize mac-addr
Parameters
mac‐addr
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to re‐initialize:
G3(su)->set macauthentication macinitialize 00-60-97-b5-4c-07

set macauthentication reauthentication

Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
enable | disable
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable MAC reauthentication on
G3(su)->set macauthentication reauthentication enable ge.4.1-5
20-26 Security Configuration
Specifies the MAC address of the session to re‐initialize.
Enables or disables MAC reauthentication.
Specifies port(s) on which to enable or disable MAC reauthentication. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
ge .4.1 though 5: