Clear Sntp Poll-Retry; Set Sntp Poll-Timeout - Enterasys G3G170-24 Cli Reference Manual

Hide thumbs Also See for G3G170-24:

Table of Contents

clear sntp poll-retry

Switch command, read‐write.

This example shows how to set the number of SNTP poll retries to 5:

G3(su)->set sntp poll-retry 5

clear sntp poll-retry

Use this command to clear the number of poll retries to a unicast SNTP server.

clear sntp poll-retry

Switch command, read‐write.

This example shows how to clear the number of SNTP poll retries:

G3(su)->clear sntp poll-retry

Use this command to set the poll timeout (in seconds) for a response to a unicast SNTP request.

set sntp poll-timeout timeout

11-30 Logging and Network Management

Specifies the number of retries. Valid values are 0 to 10.

Specifies the poll timeout in seconds. Valid values are 1 to 30.