Ip Igmp; Ip Igmp Enable - Enterasys G3G170-24 Cli Reference Manual

ip igmp

For information about...
ip igmp startup-query-count
ip igmp last-member-query-interval
ip igmp last-member-query-count
ip igmp robustness
ip igmp
Use this command to enable IGMP on the router. The no form of this command disables IGMP on
the router.
Syntax
ip igmp
no ip igmp
Parameters
None.
Defaults
None.
Mode
Global configuration: G3(su)‐>router(Config)#
Usage
Enabling IGMP on a routing interface requires both the ip igmp command (page 10‐10), which
enables it on the router, and the ip igmp enable command (page 10‐10), which enables it on an
interface. Once these commands are executed, the device will start sending and processing IGMP
multicast traffic. IGMP is disabled by default, both globally and on a per interface basis.
Example
This example shows how to enable IGMP on the router:
G3(su)->router(Config)#ip igmp

ip igmp enable

Use this command to enable IGMP on an interface. The no form of this command disables IGMP
on an interface.
Syntax
ip igmp enable
no ip igmp enable
Parameters
None.
10-10 IGMP Configuration
Refer to page...
10-14
10-15
10-15
10-16