cls (clear screen)
Use this command to clear the screen for the current CLI session.
Syntax
cls
Parameters
.
None
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to clear the CLI screen:
G3(su)->cls
exit
Use either of these commands to leave a CLI session.
Syntax
exit
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
By default, switch timeout occurs after 15 minutes of user inactivity, automatically closing your
CLI session. Use the set logout command (page 2‐25) to change this default.
Example
This example shows how to exit a CLI session:
G3(su)->exit
cls (clear screen)
Enterasys G-Series CLI Reference 2-51