Set Snmp Targetparams; Show Snmp Targetparams Output Details - Enterasys G3G170-24 Cli Reference Manual

Example
This example shows how to display SNMP target parameters information:
G3(su)->show snmp targetparams
--- SNMP TargetParams information ---
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Table 5‐8 provides an explanation of the command output.
Table 5-8 show snmp targetparams Output Details
Output Field
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status

set snmp targetparams

Use this command to set SNMP target parameters, a named set of security/authorization criteria
used to generate a message to a target.
Syntax
set snmp targetparams paramsname user user security-model {v1 | v2c | usm} message-
processing {v1 | v2c | v3} [noauthentication | authentication | privacy] [volatile
| nonvolatile]
Parameters
paramsname
= v1ExampleParams
= public
= SNMPv1
= noAuthNoPriv
= nonVolatile
= active
= v2cExampleParams
= public
= SNMPv2c
= noAuthNoPriv
= nonVolatile
= active
= v3ExampleParams
= CharlieDChief
= USM
= authNoPriv
= nonVolatile
= active
What It Displays...
Unique identifier for the parameter in the SNMP target parameters table.
Maximum length is 32 bytes.
Security string definition.
SNMP version.
Type of security level (auth: security level is set to use authentication
protocol, noauth: security level is not set to use authentication protocol,
or privacy).
Whether entry is stored in volatile, nonvolatile or read-only memory.
Status of this entry: active, notInService, or notReady.
Specifies a name identifying parameters used to generate SNMP messages
to a particular target.
set snmp targetparams
Enterasys G-Series CLI Reference 5-23