Show Spantree Portadmin; Show Spantree Portpri - Enterasys G3G170-24 Cli Reference Manual

Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the default Spanning Tree admin state to enable on
G3(rw)->clear spantree portadmin ge.1.12

show spantree portadmin

Use this command to display the status of the Spanning Tree algorithm on one or more ports.
Syntax
show spantree portadmin [port port-string]
Parameters
port port‐string
Defaults
If port‐string is not specified, status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display port admin status for
G3(ro)->show spantree portadmin port ge.1.1
Port ge.1.1 has portadmin set to enabled

show spantree portpri

Use this command to show the Spanning Tree priority for one or more ports. Port priority is a
component of the port ID, which is one element used in determining Spanning Tree port roles.
Syntax
show spantree portpri [port port-string] [sid sid]
Resets the default admin status on specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
(Optional) Displays status for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 4‐1.
show spantree portadmin
ge .1.1:
Enterasys G-Series CLI Reference 6-33
ge .1.12: