clear vlan name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to remove a static VLAN 9 from the device's VLAN list:
G3(su)->clear vlan 9
clear vlan name
Use this command to remove the name of a VLAN from the VLAN list.
Syntax
clear vlan name vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the name for VLAN 9:
G3(su)->clear vlan name 9
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Purpose
To assign default VLAN IDs to untagged frames on one or more ports, to configure VLAN ingress
filtering and constraints, and to set the frame discard mode.
Commands
For information about...
show port vlan
set port vlan
clear port vlan
7-6 802.1Q VLAN Configuration
Specifies the VLAN ID of the VLAN(s) for which the name will be cleared.
Refer to page...
7-7
7-7
7-8