Power And Signal Connections - Agilent Technologies 5517B Operation And Service Manual

Figure 2-2. HP 10793A/B/C Laser Head
Cable

2-20. Power and Signal Connections

2-21. The HP 5517B/C/D Laser Head rear panel contains an 18-pin connector used for connecting its power and
signal lines to other laser transducer system components. (Refer to Figures 2-2 through 2-8 for interconnection
Table 2-2
diagrams for typical laser transducer systems.) lists all power and signal lines that are available at the
rear-panel connectors. The laser transducer system manual gives additional system wiring information.