Using Voice Call; Making A Voice Call - Nortel Compact ICS 7.1 Coordinator Manual

No number stored
Start of list
NEXT
Their list full
Your list full
For other displays, see ''Common feature displays'' on page 243.

Using Voice Call

You can make an announcement or begin a conversation through the
speaker of another telephone in the system.
Tip -
buttons have no appearances for voice calls, and the
telephone does not ring for voice calls. For more
information about Hunt Groups, see ''Programming Hunt
Groups'' on page 165. For more information about
Answer buttons, see ''Answer DNs and Answer keys'' on
page 57.

Making a Voice Call

Muting Voice Call tones
When a voice call begins at your telephone, you hear a beep every 15
seconds as a reminder that the microphone is on. To stop it from beeping,
pick up the handset or press the mute button.
N0130955 01
There has been no number programmed for the
voice message center. Contact your voice
messaging service provider.
Your are at the beginning of your list of
messages. Press NEXT to move through your
messages.
You are trying to send a message to a user
whose message waiting list is full.
You have tried to send a message but your
telephone list of sent messages is full. Cancel
one of the messages you have sent, if possible,
or wait until you have received a reply to one of
those messages.
Hunt Groups cannot accept voice calls. Answer
Communicating in the office / 133
Press ≤flfl.
Compact ICS 7.1 System Coordinator Guide
≤flfl