Termination Instruction; End Sequence Program (End) - Mitsubishi MELSEC QS Series Programming Manual

END
5.5

Termination Instruction

5.5.1

End sequence program (END)

END
END
Function
(1) The termination of a sequence program is indicated.
Execution of the END instruction will cause the safety CPU module to terminate the program
that was being executed.
(2) END instruction is automatically set by the GX Developer during programming.
Operation Error
(1) There are no operation errors associated with the END instruction.
5-42
5.5 Termination Instruction
5.5.1 End sequence program (END)
Internal Devices
Set
Constants
Data
Bit Word
–– ––
0
Sequence program
END
END
Others