Menu Structure - Mitsubishi MELSEC Q series User Manual

8.2.2

Menu structure

The menu structure of the configuration tool is as listed below.
New
Open
Save
Save as
Change PLC series
Read Logging Setting from Memory Card
(SD)
Write Logging Setting into Memory Card
(SD)
Recent Files
Exit
Delete Data Logging Setting
Copy and Add Data Logging Setting
Batch Data Insertion
Cut Setting Item
Copy Setting Item
Paste Setting Item
Paste device copied in other application
software
Insert Copied Setting Item
Insert device copied in other application
software
Insert Cut Setting Item
Delete Setting Item
Move Setting Item Upward
Move Setting Item Downward
Device Batch Replacement
Switch Display Language
Transfer Setup
Read Logging Setting
Write Logging Setting
Delete Logging Setting
Logging Status and Operation
Logging File Operation
Data Logging File Transfer Status
Start GX LogViewer
Open Manual
About Configuration tool
Project
Creates a new project, discarding the currently editing project.
Opens a project file that is stored in the local disk.
Saves the current project data to the current file.
Saves the current project file with a different name.
Changes the programmable controller series of the project being edited.
Reads the data logging setting written on an SD memory card in the personal
computer.
Writes the currently editing data in a form available for CPU module operation. Data
are written directly to the SD memory card in the personal computer. When the SD
memory card is installed into the CPU module, logging is started.
Lists the recently used files in the configuration tool.
Terminates the configuration tool.
Edit
Deletes the data logging setting selected on the edit item tree.
Copies the data logging setting selected on the edit item tree and adds it.
Sets the setting items all at once.
Cuts the setting in the tabular form.
Copies the setting in the tabular form.
Pastes the setting in the tabular form.
Pastes a device which is copied in other application into a line selected. (Existing
data in the line are overwritten and erased.)
Pastes the copied setting in the tabular form.
Pastes a device which is copied in other application into a line selected and shifts
down existing data in the selected line and below.
Pastes the cut setting in the tabular form.
Deletes the setting in the tabular form.
Moves the setting item upward.
Moves the setting item downward.
Replaces all of the configured devices.
View
Changes the display language from the menu bar.
Online
Performs communication setting for connection to a CPU module.
Reads the setting from the CPU module.
Writes the setting to the CPU module.
Deletes the setting in the CPU module.
Checks the logging status.
Accesses the CPU module, and downloads or deletes a file in the SD memory card
installed in the CPU module.
Displays transfer status of data logging files.
Tool
Starts GX LogViewer.
Help
Starts e-Manual Viewer, and opens the manual.
Displays the product information of the configuration tool.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Reference
Page 103, Section 8.3.1
Page 103, Section 8.3.2
Page 104, Section 8.3.3
Page 105, Section 8.3.4
Page 106, Section 8.3.5
Page 108, Section 8.3.6


Reference
Page 99, Section 8.2.4
Page 101, Section 8.2.6
8
Page 119, Section 8.4.6
Page 101, Section 8.2.6
Page 119, Section 8.4.6
Page 101, Section 8.2.6
Page 102, Section 8.2.7
Reference
Page 47, Section 5.4
Reference
Page 136, Section 8.6
Page 143, Section 8.7
Page 145, Section 8.8
Page 145, Section 8.8
Page 147, Section 8.9
Page 149, Section 8.10
Page 154, Section 8.12
Reference
Page 47, Section 5.3
Reference
Page 156, Section
8.13.1
Page 156, Section
8.13.2
97