Procedure: Setting Dial Method - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
Set Dial Method
This section explains the operation of the front panel interface for
selecting a dial method. The screens for the SET DIAL
METHOD? menu are listed below.
DIAL = RS-366?
DIAL = RS-232?
DIAL = DTR?
DIAL = HOTLINE?
DIAL = MANUAL?
EXIT?

Procedure: Setting Dial Method

Perform the following steps to set the dial method.
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays SET DIAL METHOD?
Press ENTER/YES . The HSL displays, for example, DIAL
2
= RS-366?
Note: An equal sign (=) indicates the current dialing
method. A right arrow (->) indicates alternate
dialing methods. A question mark (?) follows both
cases.
If you want to keep the setting,
Press ENTER/YES . The HSL displays RS-366 SAVED,
and then returns to the HOME screen.
OR
Press NEXT/NO or BACK until the HSL displays EXIT?
Press ENTER/YES . The HSL displays SET DIAL
METHOD?
If you want to change the setting,
Press NEXT/NO or BACK to step forward or backward to
the desired dial method, for example, DIAL -> RS-
232?
Press ENTER/YES to enable the dial method displayed.
The HSL displays a confirmation message, for example
RS-232 SAVED, and then returns to the HOME screen.
Chapter 3: Using the Front Panel
Page 3-9