Avaya 6424D+M User Manual page 97

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
Appendix D: Applications and Switch Administration
PROC 321 Word 2 (Screen D-9) defines the digit group and
dialing format for a trunk group in an AAR pattern and should
be populated as follows:
Field 1 (Pattern Number): 30.
Field 2 (Preference): 1.
Field 3 (Pause Length): 2. This is the pause length, in
seconds, before the outpulsing of group one digits.
Field 4 (Number of Digits): 10. Ten digits will be passed
along to SDDN (115 + 7 digit SDDN number).
Field 5 (Signaling): 0. "0" indicates touch-tone signaling
for outpulsing.
In this application, only one trunk group needs to be defined.
All other groups will not be administered.
ENHANCED MODE - PROCEDURE:
AAR - SUBNET TRUNKING
1. Pattern Number: [30]
2. Preference Number: [1]
GROUP ONE
3. Pause Length: [2]
4. Number of Digits: [10]
5. Signaling: [0]
GROUP TWO
6. Pause Length: [--]
7. Number of Digits: [--]
8. Signaling: [-]
GROUP THREE
9. Pause Length: [--]
10. Number of Digits: [--]
11. Signaling: [-]
GROUP FOUR
12. Pause Length: [--]
13. Signaling: [-]
Generic 2 Routing Administration - Subnet Trunking
321, WORD: 2
SCREEN D-9
Page D-23