Reset Options; Call Control - Avaya 6424D+M User Manual

Chapter 3: Using the Front Panel
Page 3-20

Reset Options

Reset Options is used to set the values of all options including the
Dialing Method to their factory default settings. All stored
telephone numbers are erased.
Procedure: Resetting Options
Press NEXT/NO or BACK until the HSL displays RESET
1
OPTIONS?
Press ENTER/YES to reset options.
2
The HSL erases all stored telephone numbers, and loads
and saves the factory default options in non-volatile
memory. The DIAL METHOD is reset to the factory
default setting.
The HSL then briefly displays OPTIONS RESET and
returns to the HOME screen automatically.

Call Control

The Call Control menu provides you with a means to dial a stored
number, answer a call, disconnect a call, and store up to four
telephone numbers. When you select CALL CONTROL?, the HSL
displays messages which are determined by the HSL's operating
mode. Refer to Chapter 5, ''Call Control Operation'' for
procedures on operating the HSL.
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES while CALL CONTROL? is displayed to
2
enter the call control mode.
If the HSL is idle, the HSL displays DIAL?
If there is an incoming call, the HSL displays ANSWER
CALL?
If there is a call in progress, the HSL displays END
CALL?
Once you are in the call control mode, you can
3
press ENTER/YES to execute the displayed call control
function, or
press NEXT/NO or BACK to step through the menu for
the following alternate choices:
STORE NUMBER?
EXIT -> CALL CON?
DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide