Home Screen; Home Screen Messages And Explanations - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide

HOME Screen

SWITCH LINK DOWN
TEST MODE ACTIVE
IDLE
INCOMING CALL
ORIGINATING CALL
DATA CALL ACTIVE
PERM CALL ACTIVE
DISCONNECTING
BUSY
TRY AGAIN
CHECK NUMBER
The HOME screen is the the first item shown on the display. This
screen is used to display HSL's status information. The display
automatically updates depending on what state the HSL is in.
Table 3-1 below illustrates the messages the HSL displays on the
HOME screen and an explanation of each.

HOME Screen Messages and Explanations

Message
The HSL is not communicating with the switch.
There is a line problem.
The HSL is in a test mode (other than self-test)
and the line is OK.
The HSL is idle.
There is an incoming call.
The HSL is originating a data call.
The HSL is in the data mode and the Permanent
Connection option is NO.
The HSL is in the data mode and the Permanent
Connection option is YES.
The HSL is going through its call disconnect
sequence at the end of a normal data call.
The HSL disconnects the call because the
number you called was busy.
The HSL disconnects the call because the switch
can not place the call at that time.
The HSL disconnects the call because the switch
could not place the call as dialed.
Chapter 3: Using the Front Panel
TABLE 3-1
Explanation
Page 3-3