Hsl Options - Avaya 6424D+M User Manual

Appendix D: Applications and Switch Administration
Page D-10
Although the information presented here pertains to the
DEFINITY Generic 1, this information can also be applied to a
System 75 or a DEFINITY Generic 3. Likewise, the DEFINITY
Generic 2 information can be applied to System 85. To assist in
describing the administration procedures, selected administration
screens are provided as reference.
Note: This section should not be used as a step-by-step
administration guide nor is it intended to replace the
information provided in the switch administration
manuals. Only those procedures and entries that are
essential to this application will be covered. It is
recommended that the proper administration manuals be
consulted before any steps are taken. Furthermore,
certain fields in various administration screens and
procedures have been left blank or their default values
have been used because the proper entry for those fields
will vary from switch to switch. It is left to the discretion
of the network administrator to properly populate these
fields.

HSL Options

For switched video applications, the HSLs on both the Generic 1
and Generic 2 are all optioned as follows:
DIAL = RS-366
SPEED = 56KBPS
DUPLEX = FULL
ANSWER = AUTO
Data Invert should be set to ON if a 64 Kbps call is established
with a data module that performs bit inversion at 64 Kbps, such as
the MPDM.
These settings are described in Chapter 4, ''Options.''
DEFINITY
DEFINITY High Speed Link
PERM CONN = NO
LOOPBACK = AT&T
DSR = NORMAL
DTR = NORMAL
Communications System
User´s Guide