DEFINITY
Communications System
DEFINITY High Speed Link
User´s Guide
ANSWERING A CALL
Front Panel
Auto Answer
When the HSL indicates the presence of an incoming call (HOME
screen displays INCOMING CALL and the green DATA LED
flashes), the call can be answered manually from the front panel or
automatically, depending on the configuration of the answer
option.
Notes:
The DTR lead on the V.35 interface must be ON or the
DTR LEAD option must be set to IGNORE before you
can answer a call.
Calls cannot be answered while the HSL is in local
loopback test mode.
When you set the ANSWER option to MANUAL, the automatic
answering feature is disabled, and all incoming calls must be
manually answered via the front panel.
Procedure: Answering a call from the front panel
From the HOME screen, press NEXT/NO until the HSL
1
displays CALL CONTROL?
Press ENTER/YES . If there is an incoming call, the HSL
2
displays ANSWER CALL?
Press ENTER/YES . The HSL answers the call and displays
3
the HOME screen.
When you set the ANSWER option to AUTO (default setting), the
automatic answering feature is enabled and the HSL
automatically answers an incoming call.
Chapter 5: Call Control Operation
Page 5-3