Ac Power; Dc Power; Environmental Requirements; Registration - Avaya 6424D+M User Manual

Avaya 6424d+m: users guide
Hide thumbs Also See for 6424D+M:
Table of Contents

Advertisement

Chapter 7: Technical Description
Page 7-2

AC POWER

DC POWER

ENVIRONMENTAL
REQUIREMENTS

REGISTRATION

Dialing Methods
Manual stored number
DTR stored number
Hotline
RS-366/RS-232
Memory
Non-volatile memory for storing options and four telephone
numbers
AC Voltage
104 to 129 volts
Frequency
57 to 63 Hz
Power Consumption
9 watts
The HSL is powered by an external power supply. Connection to
the power supply uses a six position male connector with one pin
removed for polarization. The power supply must provide +5.0
vdc, and 12.0 vdc relative to the signal ground lead. The 5 volt
supply must provide at least 1.50 amp with a voltage tolerance of
5 percent. The 12 volt circuits must provide at least 0.10 amp
each with a voltage tolerance of 10 percent. The power supply
also provides a separate green wire ground connection. The green
wire ground lead is permanently connected to the signal ground
inside the HSL.
Operating Temperature
40 to 120 degrees F (5 to 49 degrees C)
Relative humidity
5 to 95 percent below 84 degrees F, less than 168 grains of
water vapor per pound of dry air above 84 degrees F
FCC: Part 15, sub-part B approved
DEFINITY
Communications System
DEFINITY High Speed Link
User´s Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents