Avaya 6424D+M User Manual page 88

Appendix D: Applications and Switch Administration
Page D-14
To route the call over Trunk Group 10 and through the SDN, the
"115" prefix must be inserted and the pseudo RNX 220 must be
replaced by the RNX that the SDN understands, 221. To do this,
the Routing Pattern form (Screen D-4) is administered in the
following manner:
Grp No. - 10. This is the trunk group over which the video
calls are to be routed over. Note that it is possible to use the
same trunk group to route both voice and video calls.
No. Del Digits - 3. This deletes the 220 pseudo RNX.
Inserted Digits - 115221. The "115" prefix is inserted along
with the proper RNX (221).
Pattern Assignments (Enter Up to 6)
Grp. FRL NPA
No.
1. 10 __ ___
2. __ __ ___
3. __ __ ___
4. __ __ ___
5. __ __ ___
6. __ __ ___
BCC Value
0 1 2 3 4
1. _ _ _ _ _
2. _ _ _ _ _
3. _ _ _ _ _
4. _ _ _ _ _
5. _ _ _ _ _
6. _ _ _ _ _
Generic 1 Routing Administration - Routing Pattern Form
With the completion of this screen, the administration for
switched videoconferencing over SDDN on the Generic 1 is
complete. Two HSLs have been administered such that when the
user dials the two numbers (each in the form of 8-220-XXXX) for
the videoconference call, the switch will select Trunk Group 10
and outpulse 115221XXXX to SDN/SDDN.
DEFINITY
DEFINITY High Speed Link
Pattern Number: 30
Prefix Toll No. Del Inserted
Mark List Digits Digits
__ __ 3 115221
__ __ __ ______________
__ __ __ ______________
__ __ __ ______________
__ __ __ ______________
__ __ __ ______________
Service/Feature
_______________ Band: ____
_______________ Band: ____
_______________ Band: ____
_______________ Band: ____
_______________ Band: ____
_______________ Band: ____
SCREEN D-4
Communications System
User´s Guide
Page 1 of 1
IXC
___
___
___
___
___
___