Disconnect A Call; Store A Number - Avaya 6424D+M User Manual

Chapter 3: Using the Front Panel
Page 3-22

Disconnect a Call

The HSL allows you to disconnect a call from the front panel.
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES to select CALL CONTROL? while the
2
HSL is on a call. The HSL displays END CALL?
Press ENTER/YES while the HSL displays END CALL?
3
The HSL disconnects the call and displays the HOME screen.
The call will not be disconnected if a switch activated test is in
progress.
Note: The Permanent Connection option must be set to NO and
the HSL must not be in a test mode activated by the
switch. Otherwise, the HSL displays the HOME screen,
and does not disconnect the call.

Store a Number

If you press NEXT/NO while the HSL displays DIAL?, ANSWER
CALL?, or END CALL? the HSL displays STORE NUMBER?
Following are the screens for STORE NUMBER?
M0:?
M1:?
M2:?
M3:?
EXIT -> STORE?
The HSL allows you to store four numbers. Each number can be
15 digits or less.
Note: 0 through 9, #, *, and , may be part of a stored
number.
To store a number, do the following:
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES to select CALL CONTROL? The HSL will
2
display either DIAL?, ANSWER CALL?, or END CALL?
Press NEXT/NO . The HSL displays STORE NUMBER?
3
Press ENTER/YES . The HSL displays M0:? if there is no
4
number stored.
Press ENTER/YES . The HSL displays M0:_ (The cursor
5
marks the first digit for storing the number.)
DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide