Dss Keys; Setting Up A Dss Key; Using Dss Keys - Avaya 20CC User Manual

DSS Keys

Setting Up a DSS Key

The 20CC has eight DSS keys along its right-hand edge. Each of these keys can store an extension
number (or group number for paging). They then allow you to dial those numbers in a single key press.
You can also use DSS keys to dial your personal speed dial numbers (see Storing Personal Speed
Dials).
To set a DSS/BLF key directory number:
1. Press PROGRAM and then the DSS key to use.
2. Enter the phone's passcode (see The Phone Passcode).
3. The display shows the current stored number (if set).
4. Press CANCEL and dial the number to store.
5. Select another DSS key and enter the required details.
6. Press DONE then PROGRAM to finish.

Using DSS Keys

Once setup, you can use the DSS key for the following actions. You can also use DSS keys to dial
personal speed dial numbers (see Using Speed Dials).
To make internal calls:
1. Press the DSS key storing the extension or group number.
To pickup calls:
1. Press the DSS key storing the ringing number (this will be giving a fast red flashing for an
extension or fast green flash for a group), the call details are shown. Press ANSWER RELEASE
to answer the call.
To make a page call:
1. Press PAGE and then the DSS key storing the extension or group number.
20CC Telephone User Guide
IP Office 40DHB0002UKAJ Issue 6b (2nd December 2004)
Page 19