DEFINITY
Communications System
DEFINITY High Speed Link
User´s Guide
Passing the Self-Test
When the test is complete, the unit enters the start-up sequence
and displays the following:
SELF-TEST PASSED
REL 1.0, VER 1.0
The HSL automatically displays the HOME screen when the
start-up sequence completes.
When the self-test completes, and a non-volatile memory error is
detected during the start-up sequence, the HSL displays the
following:
SELF-TEST PASSED
MEMORY ERROR
DEFAULT OPTIONS
LOADED
REL 1.0, VER 1.0
The HSL automatically displays the HOME screen when the
start-up sequence completes.
Failing the Self-Test
If the self-test fails, the following messages are displayed for 4
seconds each, and the self-test repeats.
SELF-TEST FAILED
CONTINUE?
You can stop the test by pressing any button while the HSL
displays these messages. The HSL will end the self-test and
display the following message during the start-up sequence.
REL 1.0, VER 1.0
The HSL automatically displays the HOME screen when the
start-up sequence completes.
Chapter 3: Using the Front Panel
Page 3-13