Avaya 6424D+M User Manual page 47

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
If you attempt to start remote loopback with self-
test when a switch test is in progress, the HSL
displays
DENIED: SWITCH
TEST IN PROGRESS
REMOTE LOOP/ST?
If you attempt to start remote loopback with self-
test when a test (other than a switch activated test)
is in progress, the HSL displays
DENIED: ANOTHER
TEST IN PROGRESS
REMOTE LOOP/ST?
To end the remote loopback with self-test, press
3
ENTER/YES while the HSL displays END REM LOOP/ST?
The HSL displays
TEST ENDED 000
REMOTE LOOP/ST?
TEST ENDED 000 shows that there were no errors, 003
shows that there were three errors, and 255 shows that
more than 254 errors were detected.
Note: The green DATA LED winks off to indicate errors are
detected.
If the remote endpoint did not loopback the test data, the
HSL displays the following when the test is stopped:
NO DATA RETURNED
REMOTE LOOP/ST?
Press ENTER/YES to repeat the test, or press NEXT/NO to
4
display the next test.
Note: Press NEXT/NO and BACK simultaneously to return
to the HOME screen.
Chapter 3: Using the Front Panel
Page 3-19