Installation Safety Instructions; Chapter 2: Installation - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
INSTALLATION SAFETY
INSTRUCTIONS

Chapter 2: Installation

IMPORTANT INSTALLATION
SAFETY INSTRUCTIONS
When this product is located in a separate building from the
telephone communications system, a line current protector
MUST be installed at the entry/exit points of ALL buildings
through which the line passes.
The following are the ONLY acceptable devices for use in
this application:
AT&T 4-type protectors
TM
ITW LINX
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack
is specifically designed for wet locations.
Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
Use caution when installing or modifying telephone lines.
RISK OF ELECTRIC SHOCK
EQUIPMENT MUST BE PROPERLY GROUNDED
Your AT&T equipment requires a properly grounded 3-
prong AC power receptacle for safe operation. Do not cut or
remove the third (ground) prong from the AT&T power
cord. Do not use 2 wire extension cords or adapters to
defeat the safety features of your equipment. If you have a
2-prong receptacle, it is very important to have it replaced
with a 3-prong receptacle, installed by a qualified electrician.
WARNING
LP-type protectors
WARNING
Chapter 2: Installation
Page 2-1