Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.11.1
Intel® SAS Interposer Card Installation
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
3.
Remove the air duct (see
4.
Align the four (4) screw holes of the SAS interposer card with the matching threaded holes on the base
of the chassis (see Letter A).
5.
Secure the SAS interposer card to the chassis using (4) four screws (see Letter B). Tighten to 5 in-lb.
6.
Attach all the connectors as required.
7.
If the RAID module needs to be installed (see
8.
Reinstall the air duct (see
9.
Reinstall the system top cover (see
Figure 83. SAS Interposer Card Installation
Section
3.1.1).
Section
3.2.1).
Section
Section
3.2.2).
Section
3.1.2).
3.11.3).
73
Advertisement
Table of Contents
