Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.13.2
Intel® RMFBU Mounting Bracket Removal
1.
Remove the system top cover (see
2.
Remove the air duct (see
3.
Disconnect the RMBFU cable from the RAID module it is attached to.
4.
Lift the latch up slightly to unlock the RMFBU assembly from the mounting bracket (see Letter A).
5.
Slide the RMFBU assembly (see Letter B) in the direction as indicated on the top of the RMFBU plastic
case.
6.
Unscrew the two screws on the RMFBU mounting bracket (see Letter C).
7.
Pull the RMFBU mounting bracket from the chassis or air duct all the way out (see Letter D).
8.
Reinstall the air duct (see
9.
Reinstall the system top cover (see
Figure 93. Intel® RMFBU Mounting Bracket Removal - Chassis
Figure 94. Intel® RMFBU Mounting Bracket Removal - Air Duct
Section
Section
2.3.1).
Section
3.2.2).
Section
3.1.1).
3.1.2).
81
Advertisement
Table of Contents
