Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.10 Intel® VROC 7.5 Key Installation / Removal
This section provides instructions to install an Intel® VROC Key in the system. Refer to the Intel® Server
M50CYP Family Configuration Guide for available options,
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
For more information on the Intel® VROC features, capabilities, and NVMe* drive population rules, refer to
the Intel® Server System M50CYP2UR Family Technical Product Specification.
3.10.1
Intel® VROC 7.5 (VMD NVMe* RAID) Key Installation
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
3.
Remove the air duct (see
4.
Remove the Intel® VROC Key from its packaging.
5.
Locate the white 4-pin key connector near the CR2032 battery.
6.
To install the key, place it over the connector and confirm the orientation of the key matches that of the
connector.
7.
Press the key down onto the connector.
8.
Reinstall the air duct (see
9.
Reinstall the system top cover (see
Figure 81. Intel® VROC Key Insertion
Section
3.1.1).
Section
3.2.1).
Section
3.2.2).
Section
3.1.2).
71
Advertisement
Table of Contents
