Figure 147. 2.5" 15 Mm Drive Outside Chassis, Ready For Installation; Figure 148. 2.5" 15 Mm Drive Installation Into Chassis - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide

Figure 147. 2.5" 15 mm Drive Outside Chassis, Ready for Installation

1. Ensure the lever is in the open position and the drive mounting rail is pulled halfway out.
2. Align the drive assembly with the open drive bay.
3. Insert the assembled 7-mm thick drive (or non-assembled 15-mm thick drive) into the drive bay
(see Letter A).
Note: Intel recommends to hold the drive with one hand while holding the lever with the other hand.
4. Push forward until the drive contacts with the backplane.
5. Complete the drive installation by closing the drive extraction lever until it locks into place (see Letter C).
112

Figure 148. 2.5" 15 mm Drive Installation into Chassis