Intel® Server System M50CYP2UR Family System Integration and Service Guide
6.9.2
12 x 3.5" Backplane Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
1. Power off the system and remove the power cable(s).
2. Remove the system top cover (see
3. Remove the air duct (see
4. Remove all drives and drive blanks from the front drive bays).
5. Disconnect all cables from the backplane.
6. Remove all fastener screws securing the backplane to drive bay (see Letter A).
7. Slide the backplane up from the bottom of the chassis and remove the backplane from the server chassis
(see Letter B).
Figure 158. 12 x 3.5" Backplane Removal
Section
6.1.1).
Section
6.2.1).
119