Processor Installation; Figure 18. Pin 1 Indicator Of Processor Carrier Clip; Figure 19. Socket Protective Cover Removal - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide
8. Align pin 1 indicator of processor carrier clip with the corner cut-out on the heat sink.
Note: In a standard 2U or 1U heat sink there are two cut-out corners, either can be used to align pin 1
indicators.
9. Gently press down the heat sink onto the processor carrier clip until it clicks into place.
10. Ensure all four heat sink corners are securely latched to the carrier clip tabs.
2.4.2

Processor Installation

Caution: Do not touch the socket pins. The pins inside the processor socket are extremely sensitive. A
damaged processor socket may produce unpredictable system errors.
1. Remove the protective cover by squeezing the finger grips (see Letter A) and pulling the cover up (see
Letter B).
2. Ensure the socket is free of damage or contamination before installing the PHM.
Caution: If debris is observed, blow it away gently. Do not remove it manually, such as with tweezers.
30

Figure 18. Pin 1 Indicator of Processor Carrier Clip

Figure 19. Socket Protective Cover Removal