Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.10.2
Intel® VROC 7.5 (VMD NVMe* RAID) Key Removal
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
3.
Remove the air duct (see
4.
Using the key pull tab, pull the key up until it disengages from the connector.
5.
Reinstall the air duct (see
6.
Reinstall the system top cover (see
3.11 Intel® SAS Interposer Card and SAS RAID Module Installation / Removal
This section provides instructions to install and remove an Intel® SAS interposer card and an Intel® SAS Raid
module. Refer to the Intel® Server M50CYP Family Configuration Guide for available options.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
Note: A SAS interposer card needs to be installed before installing a SAS RAID module.
72
Figure 82. Intel® VROC Key Removal
Section
3.1.1).
Section
3.2.1).
Section
3.2.2).
Section
3.1.2).
Advertisement
Table of Contents
