Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.4.6
3.5" Drive Carrier Installation
Note: The 3.5" drive carrier must be completely removed from the chassis to install a drive into the drive
carrier.
1. Align the drive assembly (drive and drive carrier) with the open drive bay.
2. With the lever in the open position, insert the drive assembly into the drive bay (see Letter A).
3. Push forward until the drive contacts with the backplane.
4. Complete the drive installation by closing the drive assembly lever until it locks into place (see Letter B).
3.4.7
3.5" Drive Carrier Removal
1. Press the button on the drive extraction/insertion lever to release the drive carrier from the drive bay (see
Letter A).
2. Using the lever, pull the drive carrier from the drive bay, all the way out (see Letter B).
56
Figure 58. 3.5" Drive Carrier Installation
Figure 59. 3.5" Drive Carrier Removal
Advertisement
Table of Contents
